How to Treat and Remove Mold

How to Treat Mold

Environmental InspectionMold is a fungus that forms or lurks mostly in areas where it is dark and isolated, particularly in basements. It occurs mostly during bad weather where flood waters is evident. Due to the lack of knowledge in homeowners on how to treat mold, the possibility of mold developing inside their homes is very high. Living in a mold infected place will cause severe health issues to any individual.  Water is definitely an allied to mold as it helps create the right environment in which it thrives, if the stagnant water is not treated and removed right away it most likely will end up in serious mildew infestation. Aside from molds destroying the home’s foundation, walls, furniture, etc… It is also factor that triggers acute health problems in humans.

Signs that will prove there’s mold growing inside your humble abode can be allergic reactions like sneezing, sore eyes or a runny nose. If you are experiencing these kind of symptoms there is a possibility that molds are already taking over your place. You will be convince whether or not your suspicion is right if you’re allergic reactions are worst when you are at home than when you are out and about.

After identifying the evidence of existing mold inside your home, you need to know how to get rid of it in its entirety. Here is how you may be able to eliminate it.

  • Stock up with some of the most effective mold killer which is often found in the house. Products like vinegar, bleach or hydrogen peroxide are great chemicals that can help you eradicate the fungus. You just need a proper tool to be able to apply the substance directly to the source of the growing fungi.
  • Wooden walls can be wiped with a potent mix made by the combination of water and bleach. A clean fabric damped with hydrogen peroxide can also help by applying it to the affected area and leaving it there for at least an hour. If the molds are situated in higher parts of the house, get an empty spray bottle and fill it up with a mixture of either water and vinegar, water and hydrogen peroxide or water and bleach solution then spray it directly where the molds are resting. Mold on cement or concrete walls can be easily killed, just wiped it with any house solutions available.
  • Sanitizing parts of your house like the basement,  bathroom and other essential areas where molds may grow is also a way to eliminate the existence of mold.
  • Don’t forget to wear protective gloves and a mask when getting rid of mold from your home. Be sure to immediately throw all infected material used to treat the molds outside in the trash afterwards. If the area where this destroying fungus is manifesting can be detached it’s better to implement all treatment outside your home.

Lastly, for the sake of your health and those around you. If you do have testingthe need of abolishing mildew from anywhere in your property whether residential or commercial, it is best to leave to a professional. But if you are the D.I.Y kind of guy, you may always come back to our site to get updated tips and tricks that will teach you how to treat mold so that you may accomplish it yourself.

How to Remove Mold

How to remove mold is a topic of interest for many people who live in humid temperatures since the growth of mold is a common issue in such places. Many people tend to get frightened the moment they discover mold in their home, but although having mold problems is a serious matter and should not be taken lightly it should not be treated with fear either.  Getting rid of mold is critical as it will cause health problems. Small problems such as headaches to even a big concern such as cancer. It is a dangerous issue and must be addressed immediately.

Mold can be avoided or prevented but difficult to keep away from any home that has gotten wet or is in a very humid climate. The main reason for the fungus is the humidity that it thrives upon. Maintaining the house completely dry is the best way to fight against it since there would be no fuel for such nasty fungi. The first step to eliminating mold is understanding that it must be correctly done to accurately get rid of it.

Many people in their desperation have and will try to get rid mold on their own not realizing the risk they put themselves in. It  is highly recommended that you allow a trained professional do this task as it can impact your health greatly. If you live in South Florida, allowing a mold removal expert will be the best and secure way to get rid of it once and or all. Our professional technicians will make sure your home is free and clear of any existing mold. You can be sure that if you give us the opportunity to help you  we will certainly eliminate it completely.

Eradicating the growth or existence of such organic matter caused by fungi is crucial to maintaining the health of all individuals as well as ensuring the protection of the material where the mold is found. Although having the fungal organism removed by an experts is most recommended, many people may not be able to afford it. In  which case, you remediationmay want to try doing it yourself. There are ways one may be able to abolish such infectious health oppressing filth.

Mold inspection experts are proud to offer step by step instructions on ways to get rid of mildew  in case you may not afford professional assistance. However, do keep in mind the health complications that doing this may cause you. It is much much more recommended to let trained technicians take the responsibility than have you take the risk. Whatever decision you may end up making, they would love to help. Stay tuned as The Mold Information Factory will be providing further information regarding this matter with the intention of teaching  you how to remove mold.

Maintain Your Property Cool Without a Central Air Conditioner to Avoid Mold Growth

AC ContractorMold spores travel through the air from place to place. Moist air is an excellent vehicle as well as environment for it to thrive in. It is important to make sure the air in our home or office is dry and cold. Keeping the air dry and cold will make it impossible for mold growth. The following paragraphs will provide information on how to keep your property cool without a central air conditioner.

During September, the weather begins to change and cold temperatures creep up. This results to many apartments turning on their heat. This leaves you in a sweaty building on those summer days. Even if you don’t have a central AC system, or can’t turn on your air conditioning system, there are options to cool your home. Here are a few of them.

Window Air Conditioners

Unfortunately, many buildings do not have a window unit or a central HVAC. Well, window units are the easiest and the cheapest air conditioning systems to install. Window AC systems can fit into any window. Some people may consider this as an expert job, but a majority of the homeowners and renters reading this article can do the job for themselves.

On the down side, such units can be quite heavy and loud, making it somewhat hard to install. Also, they normally cool one room only. If you have a bigger apartment, you are definitely going to require more than one window system.

Consider Using Ceiling Fans

The perfect way to circulate some air around your house without an AC unit is a top-notch ceiling fan. But, you first require some cold air to move around. Open the windows and then switch on the fans close to your windows. If the fan is close to the front door, open it and allow some cold air come through. Many buildings have colder air blowing via the hallways.

If you have a home and you are looking for options to cool your house while reducing your air conditioning intake, consider installing a whole room fan. They pull external air through the windows blowing it into the attic. This reduces your equipment’s costs and maintains your house cool during the fall.

Consider Blocking Sunlight

The sun delivers heat to many buildings, but when you are finding ways to cool your humble abode, it becomes an unwelcome resource. You therefore need to block the sunlight in absence of the HVAC. Remember that the south-facing windows always bring in more heat. Ensure that you leave the shades down whenever possible or install solar screens to the panels.

Reduce The Heat-Producing Appliances

While this trick is very easy in nature, many people forget about it. The dryer, stove, oven, dishwasher or even lights brings in extra heat. While we are not recommending that you boycott your home cooking, if you actually want to maintain your apartment cold, try to reduce these heat-producing appliances.

Consider using the microwave. Then try drying your clothes as you cook your dinner. Turn off all the lights in rooms you are not using and be saving on electricity in the meantime. Always maintain these ideas at the back of your mind if you happen to find yourself sweating within your own house or apartment.

Here is the bottom line

There are many ways of cooling your apartment or home without a central HVAC system. Although some of the above tricks may not drop your internal temperature to at least 65 degrees, they all assist lower heat and offer a more relaxing and comfortable setting. Are you feeling pretty tired of having to wait for your property owner install a central air conditioning system? We can help. So if you require a Nate certified and licensed engineer, call the professionals at for immediate expert assistance now.

The Danger of Mold Exposure and It’s Symptoms

Mold exposure symptoms are more common than people are aware of. Mildew is a dangerous organism that generally thrives in moist and wet places. The areas most targeted by this lethal fungus include mainly bathrooms, kitchens and basements. These fungi damages the area it expands on and can significantly affect the health of individuals living around it. Regular exposure to mold will lead to extreme health issues such as adverse lung infection, in many cases it can and will cause death before all symptoms can be determine. The development of mold can be prevented and/or contained by maintaining a dry environment.


Daily human activity causes mold to rapidly spread to different locations in the house. This harmful fungus loves moist and thrives on wet and illuminated environments. It expands on any structure that provides the right conditions for its development. Sadly, many people if not everybody is oblivious to the extreme health impact caused by the exposure to it as well as the damage it causes to any structure it grows on. A vast majority on people are unaware that many of the health issues afflicting us may actually be symptoms of the fungi infestation in our home or office.

Respiratory issues are normally the initial symptoms of mold exposure. However, a potentially bigger and more severe health risk of mold poisoning is caused due to the volatile organic compounds (VOCs) produced by these toxic organisms. Those with chronic (long-term) lung disease are significantly affected when exposed to the poisonous gas (mycotoxin) produced by these harmful tiny organisms. Healthy individuals often experience allergic symptoms such as wheezing and coughing triggered by the exposure to mold. Many people do not always show symptoms correlated to direct mold exposure but may later display health conditions caused by the exposure.

So, how do you find out if you have a mold problem in you house or office to avoid direct exposure? Water or moisture problems does not specifically mean that mold has developed in your property. However, it does mean that if not treated promptly it will turn into a mold issue. If you have an area in your home or office where moist is evident and has not been controlled then this can be a possible sign of mildew and should get looked at immediately. Also, yellowish stains on the walls of your property are normally formed due to moisture or water which facilitates the development of a fungi infestation.

In conclusion, making sure to get an inspection done on your property to confirm whether or not you have a mold problem is always recommended. However, it would certainly be wise to also check your house every so often for any visual signs of it. Now, if you consider you may have molds spreading in your home or office than you must call an expert immediately and have them send the best mold inspection experts to visually analyze your property FREE of charge. If you find yourself, family member, employee, co-worker or anyone for that matter experiencing any of the mold exposure symptoms mentioned on this content, please take them to a hospital for further analysis.